Ermenrich NetGeeks NP25 PoE Tester - ERMENRICH
The Ermenrich NetGeeks NP25 is a tester for cables within PoE-powered networks. It is used to set up IP telephony networks, implement IP surveillance systems, connect wireless access points, etc. The Ermenrich NetGeeks NP25 supports all types of PoE devices. It can verify cable functionality, identify PSE type, identify midspan/endspan, and measure power and voltage.
The Ermenrich NetGeeks NP25 is a tester for cables within PoE-powered networks. It is used to set up IP telephony networks, implement IP surveillance systems, connect wireless access points, etc. The Ermenrich NetGeeks NP25 supports all types of PoE devices. It can test cable functionality, identify PSE type, identify midspan/endspan, and measure power and voltage.
The meter includes a transmitter and remote unit. The transmitter requires three standard batteries (not included). Compact and lightweight, the Ermenrich NetGeeks NP25 is easy to operate using just a few buttons. Measurement results are shown on the integrated LCD display with backlight. Suitable for testing STP/UTP cables (CAT5, CAT6) and telephone cables. The length of the cables you wish to test must not exceed 600 metres.
Key features:
- Identification of PSE types (standard or non-standard), midspan/endspan identification
- Power and voltage test, powered device test function
- Cable test for short circuits, twisted pairs, open circuits
- Tested cable types: STP/UTP network cables (CAT5, CAT6) and telephone cables
- Power (transmitter only): 3 AAA alkaline batteries
The package contains:
- Transmitter
- Remote unit
- RJ11 patch cable
- RJ45 patch cable
- Alligator clip
- DC cable
- Carry bag
- User manual and warranty card
Brand | Ermenrich |
Warranty | 5 лет |
EAN | 5905555016856 |
Package size (WxDxH) | 19x11x4 cm |
Shipping weight | 0.295 kg |
=== Delimiter === | Transmitter |
Ports | RJ45, PoE, loopback, DC (input), DC (output) |
Tested cable types | telephone cables, STP/UTP network cables (CAT5, CAT6) |
Maximum tested cable length , m | 600 |
Cable tests | +, (shorts, twisted pairs, open circuits) |
Loopback test function | +, compatible with 10/100 Mbps switches |
PoE test | yes |
Testing PoE-powered devices (PD) | yes |
Detection voltage polarity | yes |
=== Delimiter === | PoE test |
PoE power type testing (PSE) | standard (IEEE 802.3at/af) / non-standard |
Midspan identification /endspan | yes |
Operating voltage (DC), V | 5 — 60 |
Power measurement range, W | 0 — 18 |
=== Delimiter === | Testing PoE-powered devices (PD) |
Operating voltage (DC), V | 5 — 60 |
Current measurement range, A | 0 — 3 |
Power measurement range, W | 0 — 180 |
=== Delimiter === | Key Features |
Operating Current maximum, mA | ≤80 |
Protection | input voltage: 48 V, current: 5 mA |
Display | LCD |
Display resolution, px | 128х64 |
Display backlight | yes |
Power supply | 3 AAA alkaline batteries (not included) |
Automatic shutdown | 15 min, 60 min, 30 min |
Operating temperature range, °C | −10… +60 |
Operating humidity range, % | 20…70 |
=== Delimiter === | Receiver/Remote Unit |
Ports | RJ45 |
td> |